$3,021 CAD / $2,100 USD
Post Hole Digger – Base: 1228XF – Boom Outside Diameter: 3 1/2 Inch Reinforced - Yoke Outside Diameter: 2 7/8 Inch Reinforced - Auger Speed: 135 RPM - Gearbox Gear Ratio: 4:1 - Gearbox Horsepower Rating: 90 - PTO Horsepower Range: 40 to 90 - 3 Point Hitch Category: Category I or II - Works with Auger Model Numbers: PHA106, PHA109, PHA112, PHA118, PHA124, PHA132 - Weight: 260 Pounds - 12 Inch x 48 Inch Auger
$805.62 CAD / $560.00 USD
Rear Blade - Base: 1291XF - Cutting Edge: 1/2 Inches x 6 Inches Reversible - Angle Pivot: 360 Degrees - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0, 15 and 30 Degrees Each Side- Moldboard Thickness: 7 Gauge - Moldboard Length: 60 Inches - Moldboard Height: 11 Inches - Tractor Horsepower (Maximum): 25 - 3 Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Parking Stand Standard - Operating Weight: 155 Pounds - Warranty: 1 Year -- Five Foot Working Width
$805.62 CAD / $560.00 USD
Rear Blade - Base: 1291XF - Cutting Edge: 1/2 Inches x 6 Inches Reversible - Angle Pivot: 360 Degrees - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0, 15 and 30 Degrees Each Side- Moldboard Thickness: 7 Gauge - Moldboard Length: 60 Inches - Moldboard Height: 11 Inches - Tractor Horsepower (Maximum): 25 - 3 Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Parking Stand Standard - Operating Weight: 155 Pounds - Warranty: 1 Year -- Five Foot Working Width
$805.62 CAD / $560.00 USD
Rear Blade - Base: 1291XF - Cutting Edge: 1/2 Inches x 6 Inches Reversible - Angle Pivot: 360 Degrees - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0, 15 and 30 Degrees Each Side- Moldboard Thickness: 7 Gauge - Moldboard Length: 60 Inches - Moldboard Height: 11 Inches - Tractor Horsepower (Maximum): 25 - 3 Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Parking Stand Standard - Operating Weight: 155 Pounds - Warranty: 1 Year -- Five Foot Working Width
$1,539 CAD / $1,070 USD
Box Blade - Base: 1741XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 48 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 360 Pounds - Warranty: 1 Year -- Four Foot Working Width
